OpenGeoSys v5 Keyword documentation

Welcome to the OGS5 keyword documentation.

Input files an corresponding keywords are listed below. Just click and find your way through. For information about this manual (how to use, how to contribute) look here.

If you have questions about some keyword, please send us an email.

Input file extensions and the source files that cope with them

File Extension	Associated source code (available only if logged in)
bc	FEM/rf_bc_new.cpp
cct	FEM/fct_mpi.cpp
fct	FEM/rf_fct.cpp
gem	FEM/rf_REACT_GEM.cpp
gli	FileIO/OGSIOVer4.cpp, GEO/geo_ply.cpp, GEO/geo_pnt.cpp, GEO/geo_sfc.cpp, GEO/geo_vol.cpp
ic	FEM/rf_ic_new.cpp
krc	FEM/rf_kinreact.cpp
mcp	FEM/rfmat_cp.cpp
mfp	FEM/rf_mfp_new.cpp
mmp	FEM/rf_mmp_new.cpp
msh	FileIO/MeshIO/OGSMeshIO.cpp, MSH/msh_lib.cpp, MSH/msh_mesh.cpp, UTL/GIS2FEM/main.cpp
msp	FEM/rf_msp_new.cpp
num	FEM/rf_num_new.cpp
out	FEM/Output.cpp, FEM/rf_out_new.cpp
pcs	FEM/rf_pcs.cpp
pqc	FEM/rf_react.cpp
rei	FEM/rf_react_int.cpp
rfd	FEM/files0.cpp, FEM/tools.cpp
st	FEM/rf_st_new.cpp
tim	FEM/rf_tim_new.cpp

Documented Keywords by Input File Extension

Input file bc

• #BOUNDARY_CONDITION
• #STOP
• $COMP_NAME
• $CONSTRAINED
• $COPY_VALUE
• $DIS_TYPE
• $DIS_TYPE_CONDITION
• $EPSILON
• $EXCAVATION
• $FCT_TYPE
• $GEO_TYPE
• $MSH_TYPE
• $NO_DISP_INCREMENT
• $PCS_TYPE
• $PRESSURE_AS_HEAD
• $PRIMARY_VARIABLE
• $TIME_CONTROLLED_ACTIVE
• $TIM_TYPE

Input file cct

• #COMMUNICATION_TABLE
• #STOP
• $MYRANK
• $NEIGHBOR
• $NNEIGHBORS

Input file fct

• #FUNCTION
• #STOP
• $DATA
• $DIMENSION
• $DIS_TYPE
• $GEO_TYPE
• $MATRIX
• $TYPE
• $VARIABLES

Input file gem

• #GEM_PROPERTIES
• #STOP
• $CALCULATE_BOUNDARY_NODES
• $DISABLE_GEMS
• $FLAG_COUPLING_HYDROLOGY
• $FLAG_DISABLE_GEM
• $FLAG_POROSITY_CHANGE
• $GEM_CALCULATE_BOUNDARY_NODES
• $GEM_INIT_FILE
• $GEM_THREADS
• $ITERATIVE_SCHEME
• $KINETIC_GEM
• $MAX_FAILED_NODES
• $MAX_POROSITY
• $MIN_POROSITY
• $MY_SMART_GEMS
• $PRESSURE_GEM
• $TEMPERATURE_GEM
• $TRANSPORT_B

Input file gli

• #POINTS
• #POLYLINE
• #STOP
• #SURFACE
• #VOLUME
• $EPSILON
• $ID
• $LAYER
• $MAT_GROUP
• $MD
• $NAME
• $POINTS
• $POINT_VECTOR
• $POLYLINES
• $SURFACES
• $TIN
• $TYPE

Input file ic

• #INITIAL_CONDITION
• #STOP
• $COMP_NAME
• $DIS_TYPE
• $GEO_TYPE
• $PCS_TYPE
• $PRIMARY_VARIABLE
• $STORE_VALUES

Input file krc

• #BLOB_PROPERTIES
• #KINREACTIONDATA
• #MICROBE_PROPERTIES
• #REACTION
• #STOP
• $ACTIVITY_MODEL
• $ALLOW_REACTIONS
• $BACTERIACAPACITY
• $BACTERIAL_YIELD
• $BACTERIANAME
• $BACTERIA_SPECIFIC_CAPACITY
• $BASETERM
• $CALC_SHERWOOD
• $CALC_SHERWOOD_MODIFIED
• $CHEMAPPNAME
• $COPY_CONCENTRATIONS
• $D50
• $DEBUG_OUTPUT
• $DM
• $DS
• $EQUATION
• $EQUILIBRIUM_CONSTANT
• $EXCHANGE_PARAMETERS
• $GAS_DISSOLUTION
• $GEOMETRY
• $GRAIN_SPHERE_RATIO
• $GROWTH
• $INHIBITIONTERMS
• $INITIAL_TIMESTEP
• $INTERFACIAL_AREA
• $ISOTOPE_FRACTIONATION
• $LAGNEAU_BENCHMARK
• $LENGTH
• $MECHANISMTERM
• $MICROBENAME
• $MINERALNAME
• $MIN_BACTERIACONC
• $MIN_CONCENTRATION_REPLACE
• $MIN_TIMESTEP
• $MONODTERMS
• $MONOD_REACTION_NAME
• $NAME
• $NAPL_CONTENT_INI
• $NAPL_CONTENT_RES
• $NAPL_PROPERTIES
• $NO_REACTIONS
• $OMEGA_THRESHOLD
• $PRECIPITATION_BY_BASETERM_ONLY
• $PRECIPITATION_EXPONENT
• $PRECIPITATION_FACTOR
• $PRODUCTIONSTOCH
• $PRODUCTIONTERMS
• $RATECONSTANT
• $RATE_EXPONENTS
• $REACTION_DEACTIVATION
• $REACTION_ORDER
• $REACTIVE_SURFACE_AREA
• $RELATIVE_ERROR
• $SCALE_DCDT
• $SHERWOOD_MODEL
• $SOLVER_TYPE
• $SORPTION_TYPE
• $SORT_NODES
• $STANDARD_GIBBS_ENERGY
• $SURFACES
• $SWITCH_OFF_GEOMETRY
• $TEMPERATURE_DEPENDENCE
• $THRESHHOLDTERMS
• $TORTUOSITY
• $TYPE
• $UI
• $_drmc_
• $_drmc__PARAMETERS

Input file mcp

• #COMPONENT_PROPERTIES
• #STOP
• $ACENTRIC_FACTOR
• $A_ZERO
• $BUBBLE_VELOCITY
• $CRITICAL_PRESSURE
• $CRITICAL_TEMPERATURE
• $DECAY
• $DIFFUSION
• $FLUID_ID
• $FLUID_PHASE
• $FORMULA
• $ISOTHERM
• $MAXIMUM_AQUEOUS_SOLUBILITY
• $MINERAL_DENSITY
• $MOBILE
• $MOLAR_DENSITY
• $MOLAR_VOLUME
• $MOLAR_WEIGHT
• $MOL_MASS
• $NAME
• $OutputMassOfComponentInModel
• $TRANSPORT_PHASE
• $VALENCE
• $VOLUME_DIFFUSION

Input file mfp

• #FLUID_PROPERTIES
• #STOP
• $COMPONENTS
• $COMPRESSIBILITY
• $DAT_TYPE
• $DECAY
• $DENSITY
• $DIFFUSION
• $DRHO_DT_UNSATURATED
• $EOS_TYPE
• $FLUID_NAME
• $FLUID_TYPE
• $GRAVITY
• $HEAT_CONDUCTIVITY
• $ISOTHERM
• $JTC
• $NON_GRAVITY
• $PHASE_DIFFUSION
• $SPECIFIC_HEAT_CAPACITY
• $SPECIFIC_HEAT_SOURCE
• $TEMPERATURE
• $VISCOSITY

Input file mmp

• #MEDIUM_PROPERTIES
• #MEDIUM_PROPERTIES_DISTRIBUTED
• #STOP
• $CAPILLARY_PRESSURE
• $CHANNEL
• $COMPOUND_DEPENDENT_DT
• $CONDUCTIVITY_MODEL
• $CONVERSION_FACTOR
• $DATA
• $DIFFUSION
• $DIS_TYPE
• $ELEMENT_VOLUME_MULTIPLYER
• $EVAPORATION
• $FLOWLINEARITY
• $GEOMETRY_AREA
• $GEOMETRY_DIMENSION
• $GEOMETRY_INCLINATION
• $GEO_TYPE
• $HEAT_DISPERSION
• $HEAT_TRANSFER
• $INTERPHASE_FRICTION
• $MASS_DISPERSION
• $MMP_TYPE
• $MSH_TYPE
• $NAME
• $ORGANIC_CARBON
• $PARTICLE_DIAMETER
• $PCS_TYPE
• $PERMEABILITY_DISTRIBUTION
• $PERMEABILITY_FUNCTION_DEFORMATION
• $PERMEABILITY_FUNCTION_EFFSTRESS
• $PERMEABILITY_FUNCTION_POROSITY
• $PERMEABILITY_FUNCTION_PRESSURE
• $PERMEABILITY_FUNCTION_STRAIN
• $PERMEABILITY_FUNCTION_STRESS
• $PERMEABILITY_FUNCTION_VELOCITY
• $PERMEABILITY_SATURATION
• $PERMEABILITY_TENSOR
• $POROSITY
• $POROSITY_DISTRIBUTION
• $RILL
• $SPECIFIC_STORAGE
• $STORAGE
• $STORAGE_FUNCTION_EFFSTRESS
• $SURFACE_FRICTION
• $TORTUOSITY
• $TRANSFER_COEFFICIENT
• $UNCONFINED
• $VOL_BIO
• $VOL_MAT
• $WIDTH

Input file msh

• #FEM_MSH
• #STOP
• $AREA
• $AXISYMMETRY
• $CROSS_SECTION
• $ELEMENTS
• $GEO_NAME
• $GEO_TYPE
• $LAYER
• $NODES
• $PCS_TYPE

Input file msp

• #SOLID_PROPERTIES
• #STOP
• $BIOT_CONSTANT
• $CREEP
• $DENSITY
• $ELASTICITY
• $EXCAVATION
• $E_Function
• $GRAVITY_CONSTANT
• $MICRO_STRUCTURE_PLAS
• $NAME
• $NON_REACTIVE_FRACTION
• $PLASTICITY
• $REACTIVE_SYSTEM
• $SOLID_BULK_MODULUS
• $SPECIFIC_HEAT_SOURCE
• $STRESS_INTEGRATION_TOLERANCE
• $STRESS_UNIT
• $SWELLING_PRESSURE_TYPE
• $THERMAL
• $THRESHOLD_DEV_STR
• $TIME_DEPENDENT_YOUNGS_POISSON

Input file num

• #NUMERICS
• #STOP
• $COUPLED_PROCESS
• $COUPLING_CONTROL
• $COUPLING_ITERATIONS
• $DYNAMIC_DAMPING
• $ELE_GAUSS_POINTS
• $ELE_MASS_LUMPING
• $ELE_SUPG
• $ELE_UPWINDING
• $EXTERNAL_SOLVER_OPTION
• $FEM_FCT
• $GRAVITY_PROFILE
• $LINEAR_SOLVER
• $LOCAL_PICARD1
• $NON_LINEAR_ITERATION
• $NON_LINEAR_SOLVER
• $NON_LINEAR_UPDATE_VELOCITY
• $OVERALL_COUPLING
• $PCS_TYPE
• $PLASTICITY_TOLERANCE
• $RENUMBER
• $TIME_STEPS

Input file out

• #OUTPUT
• #STOP
• #VERSION
• $AMPLIFIER
• $DAT_TYPE
• $DIS_TYPE
• $ELE_VALUES
• $GEO_TYPE
• $MFP_VALUES
• $MMP_VALUES
• $MSH_TYPE
• $NOD_VALUES
• $PCON_VALUES
• $PCS_TYPE
• $RWPT_VALUES
• $TECPLOT_ZONE_SHARE
• $TIM_TYPE
• $VARIABLESHARING

Input file pcs

• #PROCESS
• #STOP
• $APP_TYPE
• $BOUNDARY_CONDITION_OUTPUT
• $COUNT
• $CPL_TYPE
• $DEACTIVATED_SUBDOMAIN
• $DISSOLVED_CO2_INGAS_PCS_NAME
• $DISSOLVED_CO2_PCS_NAME
• $ELEMENT_MATRIX_OUTPUT
• $GEO_TYPE
• $MEDIUM_TYPE
• $MEMORY_TYPE
• $MSH_TYPE
• $NEGLECT_H_INI_EFFECT
• $NUM_TYPE
• $OutputMassOfGasInModel
• $PCS_TYPE
• $PHASE_TRANSITION
• $PRIMARY_VARIABLE
• $PROCESSED_BC
• $RELOAD
• $SATURATION_SWITCH
• $SAVE_ECLIPSE_DATA_FILES
• $SIMULATOR
• $SIMULATOR_MODEL_PATH
• $SIMULATOR_PATH
• $SIMULATOR_WELL_PATH
• $ST_RHS
• $TIME_CONTROLLED_EXCAVATION
• $TIM_TYPE
• $UPDATE_INI_STATE
• $USE_PRECALCULATED_FILES
• $USE_VELOCITIES_FOR_TRANSPORT

Input file pqc

• #STOP
• #ende
• #libprint

Input file rei

• #REACTION_INTERFACE
• #STOP
• $ALL_PCS_DUMP
• $DISSOLVED_NEUTRAL_CO2_SPECIES_NAME
• $HEATPUMP_2DH_TO_2DV
• $INITIAL_CONDITION_OUTPUT
• $MOL_PER
• $PCS_RENAME_INIT
• $PCS_RENAME_POST
• $PCS_RENAME_PRE
• $POROSITY_RESTART
• $PRESSURE
• $P_VLE
• $RESIDUAL
• $SODIUM_SPECIES_NAME
• $SOLID_SPECIES_DUMP_MOLES
• $TEMPERATURE
• $UPDATE_INITIAL_SOLID_COMPOSITION
• $VLE
• $WATER_CONCENTRATION
• $WATER_SATURATION_LIMIT
• $WATER_SPECIES_NAME

Input file rfd

• #CURVE
• #CURVES
• #STOP
• $INTERPOLATION
• $MSH_TYPE

Input file st

• #SOURCE_TERM
• #STOP
• $AIR_BREAKING
• $CHANNEL
• $COMP_NAME
• $CONSTRAINED
• $DISTRIBUTE_VOLUME_FLUX
• $DIS_TYPE
• $EXPLICIT_SURFACE_WATER_PRESSURE
• $FCT_TYPE
• $GEO_TYPE
• $MSH_TYPE
• $NEGLECT_SURFACE_WATER_PRESSURE
• $NODE_AVERAGING
• $PCS_TYPE
• $PRIMARY_VARIABLE
• $TIME_INTERPOLATION
• $TIM_TYPE

Input file tim

• #STOP
• #TIME_STEPPING
• $CRITICAL_TIME
• $INDEPENDENT
• $PCS_TYPE
• $SUBSTEPS
• $TIME_CONTROL
• $TIME_END
• $TIME_FIXED_POINTS
• $TIME_SPLITS
• $TIME_START
• $TIME_STEPS
• $TIME_UNIT

Last modified: 2016-01-21 13:48:58.958857

This page has been generated automatically. Do not edit it manually! It will be overwritten in regular intervals.

If you want to edit the handwritten part of this page, please do so here.